Turbine flowmeter Caution Matters​

Turbine flowmeter Caution Matters

 

Before shipment, the LWGY turbine flow meters have been thoroughly tested at the factory. And when receiving such products, users perform a visual check to assertain they have not been damaged during shipment.

 

1.1 Check of models and specifications

 

Both model and important specification parameter of the flow meter are marked in the name plate on the body, please check whether they are the same as those specified in the order.

 

In case of need, contact us. Please make sure to describe model and serial number (No). from the data plate.

   1.2 Cautionary statements for transportation and storage

 

After the flow meter’s arrival at the site of installed, please keep the packing state when we delivered such product, so as to avoid damage from carelessness.After arrival at the application site, the flow meter should be installed in time, so as to protect it from unexpected damages.If the product needs to be stored for a quite long period, please oberve the following.

 

a) where possible store the flow meter without unpacking.

 

b) select a storage area that is::

 

0 Equipped against precipitation, moisture and sunshade.

 

0 Relatively free from mechanical vivration or impacts shock.

 

0 The flow meter shall be stored in an indoor place featuring a temperature from 5℃ to 40℃, a relative humidity not higher than 85%, a good ventilation, free of corrosive gases.

 

Note: 1. The flow meter is of big weight, please take care not to be hurt during operation.

 

2. An important parameter of the flow meter--K-factor is recorded in the acceptance certificate. Please take care to keep it properly.