Xi'an Camon Automatic Instrument Co.,Ltd

Address:1803Rm,buliding C, No.18, Dianzi First Road, Yanta District Xi'an China

Tel:+86-029-88243812

Fax:+86-029-88241170

Email:info@camoner.com

Post Code:710065

Home > Industry Knowledge > Content

Thermal mass flowmeter

Xi'an Camon Automatic Instrument Co.,Ltd | Updated: Feb 05, 2018

Mass Flowmeter installation

Installation position and requirement for pipeline

1 .The installation of instrument should be far away from the elbow, obstacles, reducer, valves, in order to

assure a stable flow field, typically.Have a long straight pipe up and down, straight long before more than

10 d, straight after long is greater than 5 d.

Often met in the figure below shows several ways of straight pipe required.

			The back pipe
NO.	Pipeline In front of the pipe section		section
(1)	straight pipe	10 D	5 D
(2)	bent pipe	10 D	5 D
(3)	flared tube	15 D	5 D
(4)	downstream of the valve	20 D	5 D
(5)	shrink tube	20 D	5 D
(6)	Under the pump	30 D	5 D

CAM600 Thermal Mass Flowmeter

2, The straight pipe can't satisfy the requirement can be concatenated gas rectifier, in order to reduce the requirement for straight pipe.

3, In the short straight pipe, elbow and valve and so on, can be used in a thermal type gas mass flowmeter, it needs some practical experience to solve. Different places have different solution, please in order to discuss.

Previous: Turbine flowmeter Caution Matters

Next: Turbine Flowmeter output signal frequency